The SimRush One+ is an indoor wireless controller / routers for your network.
It is pre-configured out of the box and managed through the SimRush web portal SPanel.
To get online, simply plug in your SimRush Outdoor unit (ODU) as instructed below.
⚠️ This unit is discontinued as a Controller. Replacement unit is the SimRush AC3
Instructions:
Make sure you follow the following steps to get online.
- Connect the ethernet cable to Ethernet Port 5 ( Highlighted in GREEN )
- Connect the Controller to the power adaptor supplied (24v 1.2a DC)
- Connect your PC to the LAN ( Highlighted in ORANGE )
- Ethernet port 2, 3 or 4 ( or SFP fibre port on One+ )
- Wireless – Default wireless is “SimRush-xxxxxx” and the Serial number as the password, e.g AABBCC112233 – Serial number is located on the box or back of the controller, all characters before the “/123”
- To make changes to the LAN address or Wireless settings, please visit SPanel:
5. (OPTIONAL) Connect your alternative broadband to utilise the built-in Load-Balancing feature, connect Ethernet Port1 ( Highlighted in RED ) to your alternative broadband network.
ℹ️ Please ensure your alternative broadband router is providing the following network via DHCP:
Gateway: 192.168.1.1 , Subnet: 255.255.255.0
| SimRush One+ | |
|---|---|
| Ether1 | AUX1 |
| Ether2 | LAN |
| Ether3 | LAN |
| Ether4 | LAN |
| Ether5 | ODU1 |
| SFP1 | LAN |
| PSU | 24v 1.5a |
