The SimRush 5009 External is an Outdoor controller & router for your network designed for external / harsh environments.
This model can support up to 2 Outdoor units – the 5G ODU must be in Port 1 and Port 2 with the controller being powered using 48v PSU.
It is pre-configured out of the box and managed through the SimRush web portal SPanel. To get online, simply plug in your SimRush Outdoor unit (ODU) as instructed below.
ℹ️ Note that this model does not have built-in WiFi, additional hardware required
Instructions:
Make sure you follow the following steps to get online.
- Connect the ethernet cable to Ethernet Port 1 for ODU1 (5G ODU), Ethernet Port 2 for ODU2 (far left ports – Highlighted in GREEN)
- Connect the Controller to the power adaptor supplied (48v 2a DC)
- Connect your PC to the LAN (Highlighted in ORANGE )
- Ethernet port 3-8 and SFP
- Wireless – Default wireless is “SimRush-xxxxxx” and the Serial number as the password, e.g AABBCC112233 – Serial number is located on the box or back of the controller, all characters before the “/123”
- To make changes to the LAN address or Wireless settings, please visit SPanel:
5. (OPTIONAL) Connect your alternative broadband to utilise the built-in Load-Balancing feature, connect Ethernet Port 8 ( Highlighted in RED ) to your alternative broadband network.
ℹ️ Please ensure your alternative broadband router is providing the following network via DHCP:
Gateway: 192.168.1.1 , Subnet: 255.255.255.0
Outdoor unit may vary from that of image, but the port to connect the ethernet cable in remains the same.
| SimRush 5009 (External) | |
|---|---|
| Ether1 | ODU1 |
| Ether2 | ODU2 |
| Ether3 | LAN |
| Ether4 | LAN |
| Ether5 | LAN |
| Ether6 | LAN |
| Ether7 | LAN |
| Ether8 | AUX1 |
| SFP-SFPPlus1 | LAN |
| PSU | 48v 2a |
