The SimRush Chateau 4G is an indoor all-in-one wireless controller / router for your network.
It is pre-configured out of the box and managed through the SimRush web portal SPanel. To get online, simply turn on the device as instructed below.
ℹ️ Please note that the SIM is pre-installed in the bottom of the unit.
Instructions:
Get started
The SIM is installed underneath the unit. If you purchased your device with a SIM it will be installed already
Make sure you follow the following steps to get online.
- Connect the supplied power adaptor (24v 1.2a DC) to the round DC port on the left side of the unit.
- Connect your PC to any LAN port ( Highlighted in ORANGE )
- Ethernet port 2, 3, 4 or 5
- Wireless – Default wireless is “SimRush-xxxxxx” and the Serial number as the password, e.g AABBCC112233 – Serial number is located on the box or back of the controller, all characters before the “/123”
- To make changes to the LAN address or Wireless settings, please visit SPanel:
4. (OPTIONAL) Connect your alternative broadband to utilise the built-in Load-Balancing feature, connect Ethernet Port1 ( Highlighted in RED ) to your alternative broadband network.
ℹ️ Please ensure your alternative broadband router is providing the following network via DHCP:
Gateway: 192.168.1.1 , Subnet: 255.255.255.0
Cable guide:
| SimRush Chateau 4G | |
|---|---|
| Ether1 | AUX1 |
| Ether2 | LAN |
| Ether3 | LAN |
| Ether4 | LAN |
| Ether5 | LAN |
| PSU | 24v 1.2a |
