SimRush 5G ATL20 – QuickStart Guide PENDING

The SimRush Lamp 5G ODU is the external element to the SimRush System which houses the carrier SIM card and LTE modem.

It is pre-configured out of the box and managed via NetPanel.

To get online, simply plug in your SimRush Outdoor unit (ODU) into your SimRush Controller (IDU) as instructed below.

Instructions:

Use the following steps to access the Outdoor unit to make changes to check SIM/Carrier status information:

It is pre-configured out of the box and managed through the SimRush web portal NetPanel.
To get online, simply plug in your SimRush Outdoor unit (ODU) into your SimRush Controller (IDU) as instructed below.

  1. Disassemble the cable gland and feed ethernet cable through to connect it to the ethernet port of the ODU-5G Omni.
  2. Feed the cable through the cable gland, ensure the ethernet connector is clicked into place. Attach cable gland assembly with the screws provided and tighten the cable gland by hand to secure.
  3. Fix the mounting bracket to the ODU using the assembly screws provided. Mount the bracket to either the wall or pole mount using the fixings provided.

———-

  1. Using a browser, browse to http://172.16.1.1/
    1. Login details are, Username: installer , Password: blank (There is no password set)
  2. Once you have logged in, the main status page will show you the current carrier/APN information along with signal information
  3. To Change the APN:
    1. At the top left corner, click “Interfaces”, the page will refresh
    2. You will need to then click on “lte1” under the name column, the page will refresh again
    3. Under the “General” section, click on the dropdown on the line for “APN Profile” – by default this will be set to EE, click the down arrow “V” which will list other carriers which are pre-generated in the list
    4. Select the desired carrier, then click apply/OK at the top of the page
  4. Further information about the Outdoor unit settings can be found on the SimRush FAQ’s section of the SimRush website: SimRush: General FAQs | SimRush

Once the setup is connected to the local mast, you can manage your SimRush controller as below.
To make changes to the LAN address or Wireless settings Please follow the IDU guide.