Chateau 4G User Guide
Safety Warnings
This product is intended to be installed indoors. Keep this product away from water, fire, humidity, or hot environments.
Use only the power supply and accessories approved by the manufacturer, which can be found in the original packaging of this product.
We cannot guarantee that no accidents or damage will occur due to the improper use of the device. Please use this product with care and operate at your own risk!
Unit Diagram

-
- Reset button.
- Powering DC jack 2.0 m
- Five Gigabit ports. From Left to Right: Ether 1 – AUX1 Port. Ether 2-5: LAN Ports.
- USB type-A slot.
- SIM slot for Micro sim card. (If you purchased your device with a SIM it will be installed already).
- Mode button
- Cover for external SMA antenna connectors (not included in package).
- Sync button (Do not use).
Quickstart
Please follow these quick steps to set up your device:

- Connect the supplied power adaptor (24v 1.2a DC) to the round DC port on the left side of the unit.
- Connect your computer to one of the Ethernet LAN ports.
- Optional – Connect an external antenna to the SMA connector (The antennas are not provided in the SimRush package)
- Insert micro SIM card into the slot located under the device. (If you purchased a SIM with your device it will be inserted already).

-
- Connect the power adapter to the DC jack.
- The default Wireless SSID is ‘SimRush-xxxxxx’. The wireless password is the hardware serial number e.g. AABBCC112233. (You will find the serial number on the box or back of the controller, the password will be all characters before the ‘/123’.
- To make changes to the LAN address or Wireless settings (such as personalising your wireless SSID) please visit NetPanel: https://netpanel.app/
Mounting
The device is designed to be used indoors, by placing it on the desktop.
Powering
The device accepts power from an adapter:
-
- Direct-input power jack (5.5 mm outside and 2 mm inside, female, pin-positive plug) 12-28 V DC⎓.
The power consumption under maximum load can reach 17 W, with attachments 23 W.
Configuration
We recommend subscribing to the SimRush Licence to ensure you always receive the latest hardware firmware updates for your device.
Front LED status

-
- Wireless network activity.
- Ethernet port activity.
- System LED.
- LTE signal strength.
Cellular connection technology based on the System LED colour:
Red: GSM
Yellow: 3G
Blue: LTE
Green: 5G NSA
Violet: 5G SA
Led not blinking: Not registered
SIM slot usage

SIM card slot is designed to use with Micro SIM cards.
Nano SIM cards have different thickness, usage with an adapter are not recommended.
Reset button
The reset button has three functions:
-
- Hold this button during boot time until the LED light starts flashing, and release the button to reset the RouterOS configuration (total 5 seconds).
-
- Keep holding for 5 more seconds, LED turns solid, release now to turn on CAP mode. The device will now look for a CAPsMAN server (total 10 seconds).
-
- Or Keep holding the button for 5 more seconds until LED turns off, then release it to make the RouterBOARD look for Netinstall servers (total 15 seconds).