The Quickmount Pro is an advanced wall mount adapter for the standard SimRush 4G Outdoor Unit.
You can mount it on the wall or use it as an adapter from a large diameter pole to a small size antenna mounting clip ensuring reliable fitment.
The Quickmount Pro gives the possibility to turn the ODU within 140° both in horizontal and vertical plane.
With the Quickmount Pro it is possible to perfectly set ODU alignment using integrated graduated scale.
It is a very durable adapter due to it’s special plastic composite material.
Instructions:
The bracket can be attached using 2 methods to a surface or pole.
Wall Mounted
The bracket comes supplied with 4 screws and wall plugs, simply offer up the bracket to the surface you wish to attach to, mark the 4 holes and drill as required then screw the supplied screws in to attach.
Pole Mounted
The bracket comes supplied with a Hose Clamp / Jubilee Clip.
Unscrew to open the clip and feed through the centre of the mounting.
Offer up to the pole where the V cut is on the rear of the mounting and tighten with a screw driver to attach.
Unit mounting
The bracket comes supplied with two device mounting types:
Tube Mount
The Tube mount can be used to attach various types of units that we supply,
Specifically it can be used with some of our Wireless links such as the WW-60G
Alternatively you can use this to stand off one of our external wireless access points like the SimRush wAP One+ or our SimRush ODU ATL18 unit.
Square Mount
The square mount which can be attached is designed to our SimRush ODU units, e.g. SimRush ODU LTE6 v2
Cable guide
Outdoor unit may vary from that of image, but port to put the ethernet cable in remains the same
